Part Image

LTC2852IMS#PBF - Analog Devices

Description: Linear Technology LTC2852IMS#PBF Line Receiver, EIA/TIA-485-A/ RS-422/ RS-485, 3.3 V, 10-Pin MSOP

Download LTC2852IMS#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LTC2852IMS#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MS Package 10-Lead Plastic MSOP (Reference LTC DWG # 05-08-1661  Rev E)
click to zoom
3D Models
LTC2852IMS#PBF - Analog Devices  - 3D model - Small Outline Packages - MS Package 10-Lead Plastic MSOP (Reference LTC DWG # 05-08-1661  Rev E)
click to zoom

LTC2852IMS#PBF Details

  • Manufacturer Part Number:

    LTC2852IMS#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    LEAD FREE, PLASTIC, MSOP-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    05-08-1661

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.00001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485-A; TIA-485-A; EIA-422

  • JESD-30 Code:

    S-PDSO-G10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    70 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    1 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    50 ns

  • Width:

    3 mm

LTC2852IMS#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC2852IMS#PBF involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • The LTC2852IMS#PBF requires a single 3.3V or 5V power supply. It's recommended to use a low-noise, low-dropout regulator to power the device. Power sequencing is not critical, but it's recommended to power up the device after the power supply has stabilized.
  • The LTC2852IMS#PBF can achieve data transfer rates of up to 100 Mbps, but the actual data transfer rate depends on the specific application, PCB layout, and signal integrity.
  • To troubleshoot issues with the LTC2852IMS#PBF, start by checking the power supply voltage, signal integrity, and PCB layout. Use an oscilloscope to verify the signal waveforms and check for noise or distortion. Also, review the device's configuration and programming to ensure it's correct.
  • The LTC2852IMS#PBF has a maximum junction temperature of 150°C. To ensure safe operation, ensure good airflow around the device, use a heat sink if necessary, and avoid overheating the device during soldering or rework.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC2852IMS#PBF Overview

Use the download button to access the LTC2852IMS#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC28, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC2852IMS#PBF

Showing 0 results

LTC2852IMS#PBF Alternates

Showing results

Image Part Number Model
Part Image SN65HVD1473DGS Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO10

Part Image SN65HVD73DGS Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO10

Part Image LTC2852IMS#PBF Linear Technology

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10

Part Image LTC2852IMS Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10

Part Image LTC2852IMS#TR Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10

For a full list of alternate parts for LTC2852IMS#PBF, check out Findchips.com