Part Image

OPA356AIDG4 - Texas Instruments

Description: High Speed Operational Amplifiers 2.5V 200MHz GBW CMOS Single Op Amp

Download OPA356AIDG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
OPA356AIDG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A
click to zoom
3D Models
OPA356AIDG4 - Texas Instruments  - 3D model - Small Outline Packages - D0008A
click to zoom

OPA356AIDG4 Details

  • Manufacturer Part Number:

    OPA356AIDG4

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00005 µA

  • Bandwidth (3dB)-Nom:

    100 MHz

  • Bias Current-Max (IIB) @25C:

    0.00005 µA

  • Common-mode Reject Ratio-Min:

    66 dB

  • Common-mode Reject Ratio-Nom:

    80 dB

  • Frequency Compensation:

    YES

  • Input Offset Current-Max (IIO):

    0.00005 µA

  • Input Offset Voltage-Max:

    9000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Nom:

    360 V/us

  • Supply Current-Max:

    14 mA

  • Supply Voltage Limit-Max:

    7.5 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    200000

  • Voltage Gain-Min:

    10000

  • Wideband:

    YES

  • Width:

    3.905 mm

OPA356AIDG4 Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a star-grounded layout, with the op-amp's ground pin connected to a central ground point. Keep the input and output traces short and away from noise sources. Use a solid ground plane and decouple the power supply pins with 0.1uF and 10uF capacitors.
  • Handle the device by the body, not the pins. Use an anti-static wrist strap or mat, and store the device in an anti-static bag. During assembly, use an ESD-protected workstation and follow proper ESD handling procedures.
  • The maximum power dissipation of OPA356AIDG4 is 500mW. Calculate it by multiplying the maximum output current (50mA) by the voltage drop across the device (5V). Ensure the device is properly heat-sinked and the ambient temperature is within the recommended range.
  • Yes, OPA356AIDG4 can be used as a unity-gain buffer. However, this will reduce the device's bandwidth and increase the noise figure. Ensure the input impedance is matched to the source impedance, and consider adding a feedback capacitor to improve stability.
  • Check the PCB layout for noise coupling and ensure the device is properly decoupled. Verify the input and output impedances are matched, and the feedback network is properly designed. Use a scope to measure the output waveform and identify any signs of oscillation.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

OPA356AIDG4 Overview

Use the download button to access the OPA356AIDG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like OPA35, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to OPA356AIDG4

Showing 0 results

OPA356AIDG4 Alternates

Showing results

Image Part Number Model
Part Image OPA356AID Texas Instruments

Operational Amplifier, 1 Func, 9000uV Offset-Max, 100MHz Band Width, CMOS, PDSO8

Part Image OPA356AIDR Texas Instruments

Operational Amplifier, 1 Func, 9000uV Offset-Max, 100MHz Band Width, CMOS, PDSO8

Part Image OPA356AIDRG4 Texas Instruments

Operational Amplifier, 1 Func, 9000uV Offset-Max, CMOS, PDSO8