Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TPS3801L30DCKRG4 - Texas Instruments

Description: Volt Supervisor Supply 1.8V/2.5V/2.7V/3V/3.3V/5V 5-Pin SC-70 T/R

Download TPS3801L30DCKRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TPS3801L30DCKRG4 - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
TPS3801L30DCKRG4 - Texas Instruments PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - DCK (R-PDSO-G5)
click to zoom
3D Models
TPS3801L30DCKRG4 - Texas Instruments - 3D model - SOT23 (5-Pin) - DCK (R-PDSO-G5)
click to zoom

TPS3801L30DCKRG4 Details

  • Manufacturer Part Number:

    TPS3801L30DCKRG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SC-70

  • Package Description:

    SC-70, 5 PIN

  • Pin Count:

    5

  • Manufacturer Package Code:

    SOT323

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Additional Feature:

    BAT BUP SW:N;MNL RST:Y;OV DET:N;PW FL IP:N;PW FL IO:N;PW FL OP:N;PRG RST DLY:N;UV DET:N;WD:N;WWD:N

  • Adjustable Threshold:

    NO

  • Analog IC - Other Type:

    VOLTAGE SUPERVISOR/RESET IC

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e4

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP5/6,.08

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max (Isup):

    0.025 mA

  • Supply Voltage-Max (Vsup):

    6 V

  • Supply Voltage-Min (Vsup):

    2 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Threshold Voltage-Nom:

    +2.64V

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.25 mm

TPS3801L30DCKRG4 Frequently Asked Questions (FAQs)

  • The recommended layout for the TPS3801L30DCKRG4 involves placing the device close to the power source, using a solid ground plane, and keeping the input and output capacitors close to the device. Additionally, it is recommended to use a Kelvin connection for the sense pins to minimize noise and ensure accurate voltage sensing.
  • The values of R1 and R2 depend on the desired trip point voltage and the hysteresis required. A higher R1 value will result in a higher trip point voltage, while a higher R2 value will result in a larger hysteresis. TI provides a calculator tool to help with resistor selection.
  • The DELAY pin allows the user to delay the reset signal output after a fault condition is detected. This can be useful in systems where a brief fault condition is expected, such as during power-up or power-down. The delay time is set by an external capacitor connected to the DELAY pin.
  • The TPS3801L30DCKRG4 is rated for operation up to 125°C, but the device's accuracy and reliability may be affected at high temperatures. It is recommended to consult the datasheet and application notes for guidance on using the device in high-temperature environments.
  • To ensure proper power-down, the input voltage should be reduced to below 0.5V, and the EN pin should be pulled low. Additionally, the device should be in a stable state before power-down to prevent unwanted reset signals.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TPS3801L30DCKRG4 Overview

Use the download button to access the TPS3801L30DCKRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPS38, or try a keyword search, such as Power Management Circuits

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to TPS3801L30DCKRG4

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

TPS3801L30DCKRG4 Alternates

Showing results

Image Part Number Model
Part Image TPS3801L30DCKR Texas Instruments

Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.64V, CMOS, PDSO5
Part Image TPS3801L30DCK Texas Instruments

Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.64V, CMOS, PDSO5