The recommended layout and placement for the TPS3840DL20DBVR involves placing the device close to the power source, using a solid ground plane, and keeping the input and output capacitors close to the device. A 4-layer PCB with a solid ground plane is recommended. Refer to the TI application note 'TPS3840 Layout and Placement Guidelines' for more information.
The choice of input and output capacitors for the TPS3840DL20DBVR depends on the specific application requirements. A general guideline is to use low-ESR capacitors with a minimum capacitance of 10uF for the input and output. X5R or X7R ceramic capacitors are recommended. The capacitor selection should also consider the voltage rating, temperature range, and ripple current requirements.
The maximum ambient temperature range for the TPS3840DL20DBVR is -40°C to 125°C. However, the device can operate up to 150°C junction temperature. It's essential to ensure proper thermal management and heat sinking to maintain a safe operating temperature.
The output voltage of the TPS3840DL20DBVR can be calculated using the formula: Vout = (R1 / R2) * (Vref - Vfb), where R1 and R2 are the feedback resistors, Vref is the internal reference voltage (1.2V), and Vfb is the feedback voltage. The output voltage range is 0.9V to 5.5V.
The EN (enable) pin on the TPS3840DL20DBVR is used to enable or disable the device. When the EN pin is pulled high (above 1.4V), the device is enabled, and when it's pulled low (below 0.4V), the device is disabled. This pin can be used to implement power sequencing or to turn the device on and off.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPS3840DL20DBVR Overview
Use the download button to access the TPS3840DL20DBVR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPS38,
or try a keyword search, such as Power Management Circuits
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
