FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Cel):
260
Qualification Status:
Not Qualified
Receiver Number of Bits:
6
Seated Height-Max:
1.2 mm
Supply Voltage-Max:
3.6 V
Supply Voltage-Min:
3 V
Supply Voltage-Nom:
3.3 V
Supply Voltage1-Max:
3.6 V
Supply Voltage1-Min:
3 V
Supply Voltage1-Nom:
3.3 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
COMMERCIAL
Terminal Finish:
NICKEL PALLADIUM GOLD
Terminal Form:
GULL WING
Terminal Pitch:
0.5 mm
Terminal Position:
QUAD
Time@Peak Reflow Temperature-Max (s):
30
Width:
12 mm
TSB41AB3PFPG4 Frequently Asked Questions (FAQs)
The maximum cable length supported by the TSB41AB3PFPG4 is approximately 4.5 meters (14.76 feet) for a single repeater configuration, and up to 9 meters (29.53 feet) for a dual repeater configuration, assuming a 1394b cable with a maximum attenuation of 12 dB.
The TSB41AB3PFPG4 is a highly configurable device. To configure it for a specific IEEE 1394 application, you need to program the device's registers using an I2C interface. You can use the Texas Instruments' 1394PHY Register Programming Guide and the TSB41AB3PFPG4 datasheet to determine the required register settings for your specific application.
The power consumption of the TSB41AB3PFPG4 varies depending on the operating mode. In normal operation, the device consumes around 450 mW (typical) when operating at 100 Mbps. In low-power mode, the device consumes around 150 mW (typical). You can refer to the datasheet for more detailed power consumption information.
Yes, the TSB41AB3PFPG4 is compatible with other IEEE 1394 PHY devices that comply with the IEEE 1394-2008 standard. However, it's essential to ensure that the devices are configured correctly and operate at the same speed to ensure proper communication.
To troubleshoot issues with the TSB41AB3PFPG4, you can use various tools such as logic analyzers, oscilloscopes, and protocol analyzers. You can also refer to the Texas Instruments' troubleshooting guide for IEEE 1394 PHY devices and the TSB41AB3PFPG4 datasheet for guidance on debugging common issues.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TSB41AB3PFPG4 Overview
Use the download button to access the TSB41AB3PFPG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TSB41,
or try a keyword search, such as Line Driver or Receivers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
