R2A20 Footprint, Symbol and 3D Model search results

Showing 25 of 864 results

Price & Stock Powered by

Filter by Manufacturer

Image	Part Number	D.S	Description	Package Category	Prices / Stock	Model	Action
	R2A20111SP#W0 Renesas Electronics	1	The R2A20111 is a power-factor correction (PFC) controller IC. This IC adopts continuous conduction mode as PFC operation. Various functions such as constant power limit, overvoltage detection, overcurrent detection, soft start, feedback-loop disconnection detection, and holding function of PFC operation through momentary outage (PFC hold function) are incorporated in a single chip. These functions reduce external circuitry. The constant power limit function allows to eliminate a significant amount of coil	Small Outline Packages	R2A20111SP#W0	3D model available Symbol and footprint available 3	1 Download Model
	R2A20112ASP#W0 Renesas Electronics	1	The R2A20112A controls a boost converter to provide an active power factor correction. The R2A20112A adopts critical conduction mode for power factor correction and realizes high efficiency and a low switching noise by zero current switching. Interleaving function improves ripple current on input or output capacitor by 180 degrees phase shift. Soft-star, the feedback loop short detection, two mode over-voltage-protection, over-current-protection, Over current ON/OFF timer protection for boost Diode short an	Small Outline Packages	R2A20112ASP#W0	3D model available Symbol and footprint available 3	1 Download Model
	R2A20132SP#W0 Renesas Electronics	1	The R2A20132SP controls two boost converters to provide a active power factor correction. The R2A20132SP is based on R2A20112 and additional functions are Slave drop function at light load, Off time control, Brownout, Double OVP, Dynamic under voltage protection, and ZCD signal open detection. Also the reference voltage tolerance is improved. The R2A20132SP adopts critical conduction mode for power factor correction and realizes high efficiency and a low switching noise by zero current switching. Interleavi	Small Outline Packages	R2A20132SP#W0	3D model available Symbol and footprint available 3	1 Download Model
	XR2A-2011-N Omron Electronics	1	IC & Component Sockets	Other	XR2A-2011-N	3D model available Symbol and footprint available 3	1 Download Model

	R2A20162SA Renesas Electronics	1	The R2A20162 is an integrated circuit semiconductor of CMOS structure with 2 channels of built in D/A converters with output buffer op-amps. It is the electrical characteristic improvement version of the M62342. Serial data transfer type input can easily be used through a combination of three lines: DI, CLK, and LD. Outputs incorporate buffer op-amps that have a drive capacity of 1 mA or above for both sink source, and can operate over the entire voltage range from almost ground to Vcc ( 0 to 5V ), making p		R2A20162SA	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20101NP Renesas Electronics Corporation	1	1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 4 X 4 MM, WQFN-24		R2A20101NP	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20050ANS#W0 Renesas Electronics Corporation	1	IC,BATTERY MANAGEMENT,LLCC,10PIN,PLASTIC		R2A20050ANS#W0	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20150NP Renesas Electronics	1	Support is limited to customers who have already adopted these products.		R2A20150NP	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20104SPW5 Renesas Electronics Corporation	1	POWER FACTOR CONTROLLER, PDSO20, 12.60 X 5.50 MM, 1.27 MM PITCH, HALOGEN FREE AND LEAD FREE, PLASTIC, SOP-20		R2A20104SPW5	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20154SP Renesas Electronics	1	The R2A20154 is an integrated circuit semiconductor of CMOS structure with 4 channels of built in D/A converters with output buffer operational amplifiers. It is the electrical characteristic improvement version of the M62334. The input is 2-wires serial method is used for the transfer format of digital data to allow connection with a microcomputer with minimum wiring. This IC corresponds to Fast mode of I²C BUS standard. The output buffer operational amplifier employs AB class output circuit with sync and		R2A20154SP	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20055NS Renesas Electronics Corporation	1	POWER SUPPLY SUPPORT CKT		R2A20055NS	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20113SP Renesas Electronics Corporation	1	0.9A POWER FACTOR CONTROLLER, PDSO8, 3.95 X 4.90 MM, 1.27 MM PITCH, PLASTIC, SOP-8		R2A20113SP	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20124AFP-U5 Renesas Electronics Corporation	1	0.2A SWITCHING CONTROLLER, 200kHz SWITCHING FREQ-MAX, PQFP40, 7 X 7 MM, 0.65 MM PITCH, LEAD FREE, PLASTIC, LQFP-40		R2A20124AFP-U5	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20124AFP-W0 Renesas Electronics Corporation	1	0.2A SWITCHING CONTROLLER, 200kHz SWITCHING FREQ-MAX, PQFP40, 7 X 7 MM, 0.65 MM PITCH, LEAD FREE, PLASTIC, LQFP-40		R2A20124AFP-W0	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20114FPW0 Renesas Electronics Corporation	1	POWER FACTOR CONTROLLER, PQFP40, 7 X 7 MM, 0.65 MM PITCH, LEAD FREE, PLASTIC, LQFP-40		R2A20114FPW0	3D model not available Symbol and footprint not available 0	0 Build or Request

	R2A20057BM Renesas Electronics Corporation	1	POWER SUPPLY SUPPORT CKT		R2A20057BM	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20168NP Renesas Electronics	1	The R2A20168 is an integrated circuit semiconductor of CMOS structure with 8 channels of built in D/A unnecessary and enabling configuration of a system with few component parts. Serial data transfer type input can easily be used through a combination of three lines: DI, CLK, and LD. Outputs incorporate buffer op-amps that have a drive capacity of 1 mA or above for both sink source, and can operate over the entire voltage range from almost ground to Vcc ( 0 to 5V ), making peripheral elements unnecessary an		R2A20168NP	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20111SPW0 Renesas Electronics Corporation	1	1A POWER FACTOR CONTROLLER WITH POST REGULATOR, 71.5kHz SWITCHING FREQ-MAX, PDSO16, 5.50 X 10.06 MM, 1.27 MM PITCH, PLASTIC, SOP-16		R2A20111SPW0	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20114ASPW5 Renesas Electronics Corporation	1	POWER FACTOR CONTROLLER		R2A20114ASPW5	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20134SP Renesas Electronics Corporation	1	Analog Circuit		R2A20134SP	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20112SP Renesas Electronics	1	Support is limited to customers who have already adopted these products.The R2A20112 controls a boost converter to provide an active power factor correction. The R2A20112 adopts critical conduction mode for power factor correction and realizes high efficiency and a low switching noise by zero current switching. Interleaving function improve ripple current on input or output capacitor by 180 degrees phase shift. The feedback loop open detection, two mode overvoltage protection, overcurrent protection are bui		R2A20112SP	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20164SA Renesas Electronics	1	The R2A20164 is an integrated circuit semiconductor of CMOS structure with 4 channels of built in D/A unnecessary and enabling configuration of a system with few component parts Serial data transfer type input can easily be used through a combination of three lines: DI, CLK, and LD. Outputs incorporate buffer op-amps that have a drive capacity of 1 mA or above for both sink source, and can operate over the entire voltage range from almost ground to Vcc ( 0 to 5V ), making peripheral elements unnecessary and		R2A20164SA	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20162SP Renesas Electronics	1	The R2A20162 is an integrated circuit semiconductor of CMOS structure with 2 channels of built in D/A converters with output buffer op-amps. It is the electrical characteristic improvement version of the M62342. Serial data transfer type input can easily be used through a combination of three lines: DI, CLK, and LD. Outputs incorporate buffer op-amps that have a drive capacity of 1 mA or above for both sink source, and can operate over the entire voltage range from almost ground to Vcc ( 0 to 5V ), making p		R2A20162SP	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20133BSP#W5 Renesas Electronics	1	Support is limited to customers who have already adopted these products.Equipped with a variety of functions for improving efficiency, driving higher efficiency and eco-friendliness for power supply systems of electric devices, and thus society as a whole. Driver ICs are also available for high-accuracy, high-efficiency LED lighting systems.		R2A20133BSP#W5	3D model not available Symbol and footprint not available 0	0 Build or Request
	R2A20124AFP-U0 Renesas Electronics Corporation	1	0.2A SWITCHING CONTROLLER, 200kHz SWITCHING FREQ-MAX, PQFP40, 7 X 7 MM, 0.65 MM PITCH, LEAD FREE, PLASTIC, LQFP-40		R2A20124AFP-U0	3D model not available Symbol and footprint not available 0	0 Build or Request
1 2 3 4 5 6 7 8 9

Can't find what you're looking for? Request this part

R2A20 Model Download Search Results

Popular Digital to Analog Converters