MEMOR Footprint, Symbol and 3D Model search results

Showing 25 of 1460445 results

Price & Stock Powered by

Filter by Manufacturer

Image	Part Number	D.S	Description	Package Category	Prices / Stock	Model	Action
	7201LA30DB Renesas Electronics	1	The 7201 is a 512 x 9 dual-port FIFO memory that loads and empties data on a first-in/first-out basis. The device uses Full and Empty flags to prevent data overflow and underflow. It has a Retransmit (RT) capability that allows for reset of the read pointer to its initial position when RT is pulsed LOW. It is designed for those applications requiring asynchronous and simultaneous read/writes in multiprocessing and rate buffer applications.	Ceramic Dual-In-Line Packages	7201LA30DB	3D model not available Symbol and footprint available 2	1 Download Model
	72615L35J Renesas Electronics	1	The 72615 is a 512 x 18 x 2 bidirectional First-In/First-Out memory, with synchronous interface for fast read and write cycle times. The SyncBiFIFO™ is a data buffer that can store or retrieve information from two sources simultaneously. Two Dual-Port FIFO memory arrays are contained in the SyncBiFIFO; one data buffer for each direction. The SyncBiFIFO has registers on all inputs and outputs. Data is only transferred into the I/O registers on clock edges, hence the interfaces are synchronous.	Plastic Leaded Chip Carrier	72615L35J	3D model not available Symbol and footprint available 2	1 Download Model
	72230L10TPG Renesas Electronics	1	The 72230 is a 2K x 8 SyncFIFO™ with clocked read and write controls. This FIFO is useful for a wide variety of data buffering needs, such as graphics, Local Area Networks (LANs), and interprocessor communication. It has 8-bit input and output ports. The Read Clock can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dual clock operation.	Dual-In-Line Packages	72230L10TPG	3D model available Symbol and footprint available 3	1 Download Model
	723624L15PFG8 Renesas Electronics	1	The 723624 is a CMOS bidirectional synchronous (clocked) FIFO. Two independent 256 x 36 dual-port SRAM FIFOs on board each chip buffer data in opposite directions. The clocks for each port are independent of one another and can be asynchronous or coincident. The enables for each port are arranged to provide a simple bidirectional interface between microprocessors and/or buses with synchronous control.	Quad Flat Packages	723624L15PFG8	3D model available Symbol and footprint available 3	1 Download Model

	72225LB10TFG Renesas Electronics	1	The 72225 is a 1K x 8 First-In, First-Out memory with clocked read and write controls and would be useful for a wide variety of data buffering needs, such as optical disk controllers, Local Area Networks (LANs), and interprocessor communication. These FIFOs have 18-bit input and output ports. The read clock can be tied to the write clock for single clock operation or the two clocks can run asynchronous of one another for dual-clock operation. These devices are depth expandable using a Daisy-Chain technique	Quad Flat Packages	72225LB10TFG	3D model available Symbol and footprint available 3	1 Download Model
	72255LA10PFG Renesas Electronics	1	The 72255 is an 8K x 18 SuperSync FIFO memory with clocked read and write controls. The Frequency Select pin (FS) has been removed, thus it is no longer necessary to select which of the two clock inputs, RCLK or WCLK, is running at the higher frequency. SuperSync FIFOs are particularly appropriate for networking, video, telecommunications, data communications and other applications that need to buffer large amounts of data.	Quad Flat Packages	72255LA10PFG	3D model available Symbol and footprint available 3	1 Download Model
	72215LB10PFG8 Renesas Electronics	1	The 72215 is a 512 x 8 First-In, First-Out memory with clocked read and write controls and would be useful for a wide variety of data buffering needs, such as optical disk controllers, Local Area Networks (LANs), and interprocessor communication. These FIFOs have 18-bit input and output ports. The read clock can be tied to the write clock for single clock operation or the two clocks can run asynchronous of one another for dual-clock operation. These devices are depth expandable using a Daisy-Chain techniqu	Quad Flat Packages	72215LB10PFG8	3D model available Symbol and footprint available 3	1 Download Model
	72T1855L6-7BB Renesas Electronics	1	The 72T1855 is a 4K x 18 / 8K x 9 TeraSync 2.5V FIFO memory with clocked read and write controls and a flexible Bus-Matching x18/x9 data flow. Bus-Matching TeraSync FIFOs are particularly appropriate for network, video, telecommunications, data communications and other applications that need to buffer large amounts of data and match busses of unequal sizes. There are two possible timing modes of operation with these devices: IDT Standard mode and First Word Fall Through mode.	BGA	72T1855L6-7BB	3D model available Symbol and footprint available 3	1 Download Model
	72201L10JG Renesas Electronics	1	The 72201SyncFIFO™ is a 256 x 9 First-In, First-Out memory with clocked read and write controls. This FIFO is useful for a wide variety of data buffering needs such as graphics, local area networks and interprocessor communication. These FIFOs have 9-bit input and output ports. The Read Clock can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dual-clock operation.	Plastic Leaded Chip Carrier	72201L10JG	3D model not available Symbol and footprint available 2	1 Download Model
	7208L25JGI8 Renesas Electronics	1	The 7208 is a 64K x 9 dual-port FIFO memory that loads and empties data on a first-in/first-out basis. The device uses Full and Empty flags to prevent data overflow and underflow. It has a Retransmit (RT) capability that allows for reset of the read pointer to its initial position when RT is pulsed LOW. It is designed for those applications requiring asynchronous and simultaneous read/writes in multiprocessing and rate buffer applications.	Plastic Leaded Chip Carrier	7208L25JGI8	3D model not available Symbol and footprint available 2	1 Download Model
	72V245L10PFG8 Renesas Electronics	1	The 72V245 is a 4K x 18 first-in, first-out memory with clocked read and write controls. It is a 3.3V version of the 72245 FIFO and is applicable for a wide variety of data buffering needs, such as optical disk controllers, Local Area Networks (LANs), and interprocessor communication. It has 18-bit input and output ports. The Read Clock(RCLK) can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dual-clock operation.	Quad Flat Packages	72V245L10PFG8	3D model available Symbol and footprint available 3	1 Download Model
	72V2103L6BC Renesas Electronics	1	The 72V2103 256K x 9/128K x 18 SuperSync II FIFO memory has flexible x9/x18 Bus-Matching on both read and write ports. The variable clock cycle counting delay associated with the latency period found on previous SuperSync devices has been eliminated. SuperSync II FIFOs are appropriate for network, video, telecommunications, data communications and other applications that need to buffer large amounts of data and match buses of unequal sizes.	BGA	72V2103L6BC	3D model available Symbol and footprint available 3	1 Download Model
	72T36105L6-7BB Renesas Electronics	1	The 72T36105 is a 64K x 36 TeraSync 2.5V FIFO memory with clocked read and write controls and a flexible Bus-Matching x36/x18/x9 data flow. TeraSync FIFOs are particularly appropriate for network, video, telecommunications, data communications and other applications that need to buffer large amounts of data and match busses of unequal sizes. There are two possible timing modes of operation with these devices: IDT Standard mode and First Word Fall Through mode.	BGA	72T36105L6-7BB	3D model available Symbol and footprint available 3	1 Download Model
	72271LA10PFG8 Renesas Electronics	1	The 72271 is a 32K x 9 SuperSync FIFO memory with clocked read and write controls. The Frequency Select pin (FS) has been removed, thus it is no longer necessary to select which of the two clock inputs, RCLK or WCLK, is running at the higher frequency. The period required by the retransmit operation and the first word data latency period is now fixed and short. (The variable clock cycle counting delay associated with the latency period found on previous SuperSync devices has been eliminated on this SuperS	Quad Flat Packages	72271LA10PFG8	3D model available Symbol and footprint available 3	1 Download Model
	72245LB10JG8 Renesas Electronics	1	The 72245 is a 4K x 8 First-In, First-Out memory with clocked read and write controls and would be useful for a wide variety of data buffering needs, such as optical disk controllers, Local Area Networks (LANs), and interprocessor communication. These FIFOs have 18-bit input and output ports. The read clock can be tied to the write clock for single clock operation or the two clocks can run asynchronous of one another for dual-clock operation. These devices are depth expandable using a Daisy-Chain technique	Plastic Leaded Chip Carrier	72245LB10JG8	3D model available Symbol and footprint available 3	1 Download Model

	72V265LA15TFGI8 Renesas Electronics	1	The 72V265 is an 16K x 18 SuperSync FIFO memory with clocked read and write controls. It's a functionally compatible version of the 72265 designed to run off a 3.3V supply for very low power consumption. The Frequency Select pin (FS) has been removed, thus it is no longer necessary to select which of the two clock inputs, RCLK or WCLK, is running at the higher frequency. SuperSync FIFOs are particularly appropriate for networking, video, telecommunications, data communications and other applications that ne	Quad Flat Packages	72V265LA15TFGI8	3D model available Symbol and footprint available 3	1 Download Model
	72211L15PFGI8 Renesas Electronics	1	The 72211SyncFIFO™ is a 512 x 9 First-In, First-Out memory with clocked read and write controls. This FIFO is useful for a wide variety of data buffering needs such as graphics, local area networks and interprocessor communication. These FIFOs have 9-bit input and output ports. The Read Clock can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dual-clock operation.	Quad Flat Packages	72211L15PFGI8	3D model available Symbol and footprint available 3	1 Download Model
	72241L10JG Renesas Electronics	1	The 72241SyncFIFO™ is a 4K x 9 First-In, First-Out memory with clocked read and write controls. This FIFO is useful for a wide variety of data buffering needs such as graphics, local area networks and interprocessor communication. These FIFOs have 9-bit input and output ports. The Read Clock can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dual-clock operation.	Plastic Leaded Chip Carrier	72241L10JG	3D model not available Symbol and footprint available 2	1 Download Model
	72T1895L6-7BB Renesas Electronics	1	The 72T1895 is a 64K x 18 / 128K x 9 TeraSync 2.5V FIFO memory with clocked read and write controls and a flexible Bus-Matching x18/x9 data flow. Bus-Matching TeraSync FIFOs are particularly appropriate for network, video, telecommunications, data communications and other applications that need to buffer large amounts of data and match busses of unequal sizes. There are two possible timing modes of operation with these devices: IDT Standard mode and First Word Fall Through mode.	BGA	72T1895L6-7BB	3D model available Symbol and footprint available 3	1 Download Model
	72V3690L7-5BB Renesas Electronics	1	The 72V3690 32K x 36 SuperSync II FIFO memory with clocked read and write controls offers flexible Bus-Matching x36/x18/x9 data flow and Asynchronous/Synchronous translation on the read or write ports ; SuperSync II FIFO's are appropriate for network, video, telecommunications, data communications and other applications that need to buffer large amounts of data and match busses of unequal sizes.	BGA	72V3690L7-5BB	3D model available Symbol and footprint available 3	1 Download Model
	72V04L15JG Renesas Electronics	1	The 72V04 is a 4K x 9 dual-port FIFO that operates at Vcc between 3.0V and 3.6V. The device will load and empty data on a first-in/first-out basis. It uses Full and Empty flags to prevent data overflow and underflow. It has a Retransmit (RT) capability that allows for reset of the read pointer to its initial position when RT is pulsed LOW. It is designed for applications requiring asynchronous and simultaneous read/writes in multiprocessing and rate buffer applications.	Plastic Leaded Chip Carrier	72V04L15JG	3D model available Symbol and footprint available 3	1 Download Model
	7205L30DB Renesas Electronics	1	The 7205 is a 8K x 9 dual-port FIFO memory that loads and empties data on a first-in/first-out basis. The device uses Full and Empty flags to prevent data overflow and underflow. It has a Retransmit (RT) capability that allows for reset of the read pointer to its initial position when RT is pulsed LOW. It is designed for those applications requiring asynchronous and simultaneous read/writes in multiprocessing and rate buffer applications.	Ceramic Dual-In-Line Packages	7205L30DB	3D model not available Symbol and footprint available 2	1 Download Model
	72V251L15PFGI8 Renesas Electronics	1	The 72V251 is an 8K x 9 First-In, First-Out memory with clocked read and write controls. It is a 3.3V version of the 72251 device and is applicable for a wide variety of data buffering needs such as graphics, local area networks and interprocessor communication. It has 9-bit input and output ports. The Read Clock can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dualclock operation.	Quad Flat Packages	72V251L15PFGI8	3D model available Symbol and footprint available 3	1 Download Model
	72V05L15JG8 Renesas Electronics	1	The 72V05 is a 8K x 9 dual-port FIFO that operates at Vcc between 3.0V and 3.6V. The device will load and empty data on a first-in/first-out basis. It uses Full and Empty flags to prevent data overflow and underflow. It has a Retransmit (RT) capability that allows for reset of the read pointer to its initial position when RT is pulsed LOW. It is designed for applications requiring asynchronous and simultaneous read/writes in multiprocessing and rate buffer applications.	Plastic Leaded Chip Carrier	72V05L15JG8	3D model available Symbol and footprint available 3	1 Download Model
	72V205L10TFG8 Renesas Electronics	1	The 72V205 is a 256 x 18 first-in, first-out memory with clocked read and write controls. It is a 3.3V version of the 72205 FIFO and is applicable for a wide variety of data buffering needs, such as optical disk controllers, Local Area Networks (LANs), and interprocessor communication. It has 18-bit input and output ports. The Read Clock(RCLK) can be tied to the Write Clock for single clock operation or the two clocks can run asynchronous of one another for dual-clock operation.	Quad Flat Packages	72V205L10TFG8	3D model available Symbol and footprint available 3	1 Download Model
23 24 25 26 27 28 29 30 31

Can't find what you're looking for? Request this part

MEMOR Model Download Search Results

Popular FIFOs