Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX1493CCJ+ - Analog Devices

Description: LCD Drivers 4.5 Digit ADC w/LCD Drivers

Download MAX1493CCJ+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX1493CCJ+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX1493CCJ+ - Analog Devices PCB footprint - Quad Flat Packages - Quad Flat Packages - 32 TQFP_1
click to zoom
3D Models
MAX1493CCJ+ - Analog Devices - 3D model - Quad Flat Packages - 32 TQFP_1
click to zoom

MAX1493CCJ+ Details

  • Manufacturer Part Number:

    MAX1493CCJ+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    32-LQFP-7X7X1.4

  • Package Description:

    7 X 7 MM, 1.40 MM HEIGHT, MO-136BC, TQFP-32

  • Pin Count:

    32

  • Manufacturer Package Code:

    32-LQFP-7X7X1.4

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.30

  • Date Of Intro:

    2003-11-18

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog Input Voltage-Max:

    2.2 V

  • Analog Input Voltage-Min:

    -2.2 V

  • Converter Type:

    ADC, DELTA-SIGMA

  • JESD-30 Code:

    S-PQFP-G32

  • JESD-609 Code:

    e3

  • Length:

    7 mm

  • Moisture Sensitivity Level:

    2

  • Number of Analog In Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    32

  • Operating Temperature-Max:

    70 °C

  • Output Bit Code:

    BINARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LQFP

  • Package Equivalence Code:

    QFP32,.35SQ,32

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.6 mm

  • Supply Current-Max:

    0.66 mA

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.8 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7 mm

MAX1493CCJ+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX1493CCJ+ involves separating the analog and digital grounds, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals, and to keep the analog signals away from the digital signals.
  • To ensure proper powering and decoupling, use a high-quality power supply with low noise and ripple. Add decoupling capacitors (e.g., 10uF and 100nF) close to the device's power pins, and use a 1uF capacitor on the VCC pin. Also, ensure that the power supply can provide the required current for the device and the load.
  • The maximum cable length supported by the MAX1493CCJ+ depends on the specific application and the type of cable used. As a general guideline, the device can support cable lengths up to 100 meters for RS-485 and 10 meters for RS-232. However, it's recommended to consult the datasheet and perform tests to determine the maximum cable length for a specific application.
  • The MAX1493CCJ+ can be configured for half-duplex or full-duplex operation by controlling the RTS (Request to Send) and CTS (Clear to Send) signals. For half-duplex operation, tie the RTS signal to the CTS signal, and for full-duplex operation, use separate RTS and CTS signals.
  • The recommended termination scheme for the MAX1493CCJ+ depends on the specific application and the type of transmission line used. For RS-485, a 120-ohm termination resistor is typically used at the far end of the transmission line, while for RS-232, a 1k-ohm pull-up resistor is used on the TX output.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX1493CCJ+ Overview

Use the download button to access the MAX1493CCJ+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX14, or try a keyword search, such as Analog to Digital Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX1493CCJ+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX1493CCJ+ Alternates

Showing results

Image Part Number Model
Part Image MAX1493CCJ+ Maxim Integrated Products

ADC, Delta-Sigma, 1 Func, 1 Channel, BICMOS, PQFP32
Part Image MAX1493CCJ-T Maxim Integrated Products

ADC, Delta-Sigma, 1 Func, 1 Channel, BICMOS, PQFP32