Digit Footprint, Symbol and 3D Model search results

Showing 25 of 18651 results

Price & Stock Powered by

Filter by Manufacturer

Image	Part Number	D.S	Description	Package Category	Prices / Stock	Model	Action
	ISL95311WIU10Z-TK Renesas Electronics	1	Terminal Voltage 0V to 13. 2V, 128 Taps I2C Interface The Intersil ISL95311 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by an I2C interface. The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The wiper of the potentiome	Small Outline Packages	ISL95311WIU10Z-TK	3D model available Symbol and footprint available 3	1 Download Model
	AD5124BRUZ100 Analog Devices	1	10 kΩ and 100 kΩ resistance options► Resistor tolerance: 8% maximum► Wiper current: ±6 mA► Low temperature coefficient: 35 ppm/°C► Wide bandwidth: 3 MHz► Fast start-up time < 75 µs► Linear gain setting mode► Single- and dual-supply operation► Independent logic supply: 1.8 V to 5.5 V► Wide operating temperature: −40°C to +125°C► 4 mm × 4 mm package option	Small Outline Packages	AD5124BRUZ100	3D model available Symbol and footprint available 3	1 Download Model
	MAX5439EUD+ Analog Devices This part was updated within the past 30 days. Set alerts for model updates on the part download page.	1	?15V, 128-Tap, Low-Drift Digital Potentiometers	Small Outline Packages	MAX5439EUD+	3D model available Symbol and footprint available 3	1 Download Model
	X9118TV14IZ-2.7 Renesas Electronics	1	The X9118 is a single digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. The digital controlled potentiometer is implemented using 1023 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the 2-wire bus interface. The potentiometer has associated with it a volatile Wiper Counter Register (WCR) and a four non-volatile Data Registers t	Small Outline Packages	X9118TV14IZ-2.7	3D model available Symbol and footprint available 3	1 Download Model

	ISL23325TFVZ-T7A Renesas Electronics	1	The ISL23325 is a volatile, low voltage, low noise, low power, 256-Tap, dual digitally controlled potentiometer (DCP) with an I2C Bus™ interface. It integrates two DCP cores, wiper switches and control logic on a monolithic CMOS integrated circuit. Each digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the I2C bus interface. Each potentiometer has an associated volatile Wiper Register (WR	Small Outline Packages	ISL23325TFVZ-T7A	3D model available Symbol and footprint available 3	1 Download Model
	ISL23428WFVZ Renesas Electronics	1	The ISL23428 is a volatile, low voltage, low noise, low power, 128-tap, dual digitally controlled potentiometer (DCP) with an SPI Bus™ interface. It integrates two DCP cores, wiper switches and control logic on a monolithic CMOS integrated circuit. Each digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the SPI bus interface. Each potentiometer has an associated volatile Wiper Register (WR	Small Outline Packages	ISL23428WFVZ	3D model available Symbol and footprint available 3	1 Download Model
	MAX5417NETA+ Analog Devices	1	2.7V ~ 5.25V Digital Potentiometer 50k Ohm 1 Circuit 256 Taps I2C Interface 8-TDFN (3x3)	Small Outline No-lead	MAX5417NETA+	3D model available Symbol and footprint available 3	1 Download Model
	X9C103SIZT1 Renesas Electronics	1	The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by	Small Outline Packages	X9C103SIZT1	3D model available Symbol and footprint available 3	1 Download Model
	X9C102SZT1 Renesas Electronics	1	The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by	Small Outline Packages	X9C102SZT1	3D model available Symbol and footprint available 3	1 Download Model
	ISL23318WFUZ Renesas Electronics	1	The ISL23318 is a volatile, low voltage, low noise, low power, I2C Bus™, 128 Taps, single digitally controlled potentiometer (DCP), which integrates DCP core, wiper switches and control logic on a monolithic CMOS integrated circuit. The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the I2C bus interface. The potentiometer has an associated volatile Wiper Register (WR) that can be dire	Small Outline Packages	ISL23318WFUZ	3D model available Symbol and footprint available 3	1 Download Model
	DS1856E-M50+T&R Analog Devices	1	Digital Potentiometer 50k Ohm 2 Circuit 256 Taps I2C Interface 16-TSSOP	Small Outline Packages	DS1856E-M50+T&R	3D model available Symbol and footprint available 3	1 Download Model
	X9251UV24IZ-2.7T1 Renesas Electronics	1	The X9251 integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated circuit. The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the SPI bus interface. Each potentiometer has associated with it a volatile Wiper Counter Register (WCR) and four nonvolatile Data Registers that can be directly written to and read by the user. The content of the WCR control	Small Outline Packages	X9251UV24IZ-2.7T1	3D model available Symbol and footprint available 3	1 Download Model
	ISL22326WFR16Z-TK Renesas Electronics	1	The ISL22326 integrates two digitally controlled potentiometers (XDCP) and non-volatile memory on a monolithic CMOS integrated circuit. The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the I2C bus interface. Each potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The cont	Quad Flat No-Lead	ISL22326WFR16Z-TK	3D model available Symbol and footprint available 3	1 Download Model
	DS1856B-050+T&R Analog Devices	1	Digital Potentiometer ICs Dual, Temperature-Controlled Resistors with Internally Calibrated Monitors and Password Protection	Small Outline Packages	DS1856B-050+T&R	3D model available Symbol and footprint available 3	1 Download Model
	X9268TS24Z-2.7T1 Renesas Electronics	1	Support is limited to customers who have already adopted these products.The X9268 integrates 2 digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. The digital controlled potentiometer is implemented using 255 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the 2-Wire bus interface. Each potentiometer has associated with it a volat	Small Outline Packages	X9268TS24Z-2.7T1	3D model available Symbol and footprint available 3	1 Download Model

	MAX5478EUD+ Analog Devices	1	Dual, 256-Tap, Nonvolatile, I?C-Interface, Digital Potentiometers	Small Outline Packages	MAX5478EUD+	3D model available Symbol and footprint available 3	1 Download Model
	X9313USZ Renesas Electronics	1	The Intersil X9313 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The	Small Outline Packages	X9313USZ	3D model available Symbol and footprint available 3	1 Download Model
	MAX5386NATE+ Analog Devices	1	Dual, 256-Tap, Volatile Low-Voltage Linear Taper Digital Potentiometers	Quad Flat No-Lead	MAX5386NATE+	3D model available Symbol and footprint available 3	1 Download Model
	X9313WSIZT1 Renesas Electronics	1	The Intersil X9313 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The	Small Outline Packages	X9313WSIZT1	3D model available Symbol and footprint available 3	1 Download Model
	DS3502U+ Analog Devices	1	High-Voltage NV I?C Potentiometer	Small Outline Packages	DS3502U+	3D model available Symbol and footprint available 3	1 Download Model
	ISL95810UIRT8Z Renesas Electronics	1	The ISL95810 integrates a digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wiper is controlled by the user through the I2C bus interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR), that can be directly written to and read by the user. The content of the WR controls the posi	Small Outline No-lead	ISL95810UIRT8Z	3D model available Symbol and footprint available 3	1 Download Model
	ISL90461UIH627Z-TK Renesas Electronics	1	The Intersil ISL90461 is a digitally controlled potentiometer (XDCP). Configured as a variable resistor, the device consists of a resistor array, wiper switches, a control section, and volatile memory. The wiper position is controlled by a 2- pin Up /Down interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is co	Small Outline Packages	ISL90461UIH627Z-TK	3D model available Symbol and footprint available 3	1 Download Model
	X9313WSZ-3T1 Renesas Electronics	1	The Intersil X9313 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The	Small Outline Packages	X9313WSZ-3T1	3D model available Symbol and footprint available 3	1 Download Model
	X9241AYVIZ Renesas Electronics	1	The X9241A integrates four digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated microcircuit. The digitally controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the 2-wire bus interface. Each potentiometer has associated with it a volatile Wiper Counter Register (WCR) and 4 nonvolatile Data Regis	Small Outline Packages	X9241AYVIZ	3D model available Symbol and footprint available 3	1 Download Model
	ISL23415WFUZ-TK Renesas Electronics	1	The ISL23415 is a volatile, low voltage, low noise, low power, SPI™ bus, 256 taps, single digitally controlled potentiometer (DCP), which integrates DCP core, wiper switches and control logic on a monolithic CMOS integrated circuit. The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the SPI bus interface. The potentiometer has an associated volatile Wiper Register (WR) that can be dire	Small Outline Packages	ISL23415WFUZ-TK	3D model available Symbol and footprint available 3	1 Download Model
3 4 5 6 7 8 9 10 11

Can't find what you're looking for? Request this part

Digit Model Download Search Results

Popular Digital Potentiometers